Sunday, January 26, 2014

Tips For Insertin Deco Teeny,Teeny bulbs into your wine bottle


 

Tips for Inserting DecoTeenty lights In Your Bottle.

 

 

Drill your hole in the back side of your bottle. Follow Instructions.

Rinse bottle and dry. You may want to dry it in a warm oven.

Thread your string of Deco Bulbs through one of the snap-in plastic grommets.

Insert Deco bulbs into bottle. Turn bottle neck down and shake bottle so the lights are more evenly distributed. I will often tie a short piece of fishing line near the terminal end of the lights and pull the bulbs up a little tighter in the neck of the bottle. The bottle cork will keep the line tight. If not using a bottle cork you would have to try a little speck of glue to the inside of the bottle neck. What often happens is the lights over time will settle down lower in the bottle leaving the top half with few bulbs.

The Clear Teeny super bright bulbs look really great in the dark colored bottles. Using clear bottles you may want to try multi-colored bulbs.

Be sure to use Darice Deco Teeny bulbs when drilling a 3/8 inch hole. Many string lights have a standard socket which is the same size as standard Christmas lights. If you using the larger bulbs you will need a ½  or 5/8 inch hole.  

 

  

 
www.lightedwinebottlemaking.com

Tuesday, January 21, 2014

Wine bottle lights DECO LED 4mm rice bulbs

4mm Rice bulbs, 20 count , multi-color on 8.5 ft.  green wire.  4mm is just a tad smaller than 3/8 inch. (about the size of a bean) These are excellent for  brightness and are cooler burning than the standard Christmas tree lights . They can be easily inserted through a 1/2 inch hole . A good choice for lighted wine bottle lamps or lighted glass blocks. An excellent set of lights to enhance any floral or craft project. Some important features are:
Straight line( no end connector),  Bulbs remain lit even if one goes out,  Durable wire, Safety fuse plug,  8.5ft. lamp cord. Over the past few years many wine bottle and glass block designers have switched from the strand of Christmas style lights to Deco Crystal bright lights. You may want to accent some of your craft projects with Decolights.
Included with your purchase is some additional tips & information that I wrote that you may find of interest.
 
Making lighted bottles for profit
How to Drill a Hole in a Wine Bottle
How to Drill a Hole in a Glass Block
How To Drill a Hole in a Bottle

Tips for Inserting Deco Teenty lights in Your Bottle
We Have In Stock For You. at reduced prices
 www.winebottlelampmaking.com


Friday, January 17, 2014

Make a Mason Jar Table Lamp with Air Freshener


This is a one pint Light blue Mason Jar Table lamp and Scented air freshener.

Air fresheners are very popular and commonly placed in any room in the house or office. They are used for aromatherapy as well as providing a pleasant atmosphere in your home.  This air freshener and colorful Mason Jar Table Lamps is a great accent when placed on the kitchen counter or as a night light in the bathroom or   family room. The soft glow of the Deco Teeny,Teeny multi-colored bulbs and the mellow scent  of your favorite  aroma provides a pleasant  accent to any room or office . You would love making one for your house.

 

Mason Jar Lamps are for Illusion only. The purchase of The Make it yourself Lamp kit includes the following.

 

 

1.       one pint light blue Mason Jar pre-drilled with a 3/8 inch hole.

2.       8. ft. white lamp cord .

3.       Pre-wired standard light socket.

4.       One standard light socket reducer (you may want to use a candelabra size bulb).

5.       A set of DECO Teeny, Teeny  Multi-colored bulbs.(wired to socket base)

 

What you need to do:

   

1.      Fill the mason jar with one of your favorite accent items.(sea shell, marbles, wine bottle corks, buttons, beach stones, thread spools, potpourri).

2.      Spread the Deco Teeny lights among the content of your mason jar.

3.      Buy a 4 inch clip-on lamp shade that will complement your lamp or room.

4.      Apply your favorite Fragrance Scent.

5.          If using wax scent cubes just un- screw jar ring and place under jar lid .

6.          If using fragrance oil just squirt a few drips threw jar top.(your will need to add new scent cubes or scented oil every so often).

 

  

 

 

 

 

    


www.winebottlelampmaking.com

Monday, January 13, 2014

one half inch diamond drill bits. wine bottle lamps glass blocks how to make bottle lamps

This is for (2) new 1/2 inch (12mm) diamond coated drill bit. (hole saw)  ( 12mm is not a true 1/2", but very close.) Many craft people prefer this size hole for their glass blocks or WINE BOTTLES lights Many of my customers have stated that this drill bit holds up very well. ..  Making lighted wine bottle lamps and lighted glass blocks has been a very popular craft for the past several years.. They are easy to make and fun to do.  All you need is your glass bottle etc. wine bottles, liquor bottles. mason jars, glass blocks  and glass food jar. The most important tool is a good quality diamond drill bits.  The 1/2 inch size if often used by wine bottle lamp designers. These 1/2 inch diamond bits are used to drill holes in title, marble, ceramics and granite.  You will find my step-by-step instructions easy to follow.  Why not make one for yourself and a few for friends.  Lighted wine bottles make a very nice, unusual  gift.   
 
Included with your purchase is some additional tips & information that I wrote that you may find of interest.
 
Making lighted bottles for profit
How to Drill a Hole in a Wine Bottle
How to Drill a Hole in a Glass Block
How To Drill a Hole in a Bottle
 

Thursday, January 9, 2014

Make A Lighted Wine Bottle Lamp

Would you like to make your own lighted wine bottle light?  They are really fun and easy to make. I have put together a complete lighted wine bottle Kit...It has:
1 3/8 inch diamond drill bit with drilling instructions.
1 set of deco 20 count multi-colored teeny brights bulbs. (I prefer the teeny bulbs because they burn cooler,brighter and can be inserted with only a 3/8 inch hole in your bottle)
1 3/8" white snap in gromment (protect the lamp cord)
1 small pack of "silly Putty" used to hold water when drilling your hole.
If you should decide to make additional bottle lights your 3/8" diamond bit should be good for 25 to 30 bottles and the "Silly Putty" can be used over & over.
You would only need to order additional Deco bulbs,(multi-colored or Clear) & gromments.

Included with your purchase is some additional tips & information that I wrote that you may find of interest.
 
How to Drill a Hole in a Wine Bottle
How to drill a hole in a glass block
Tips for Inserting DECO light bulbs
Special prices on additional size diamond bits & DECO Craft Lights
 
 www.lightedwinebottlemaking.com

Tuesday, January 7, 2014

1/2 inch diamond drill bit for lighted wine bottles

This is for (2) new 1/2 inch (12mm) diamond coated drill bit. (hole saw)  ( 12mm is not a true 1/2", but very close.) Many craft people prefer this size hole for their glass blocks or WINE BOTTLES lights Many of my customers have stated that this drill bit holds up very well. ..  You may want to make your own lighted wine bottle lamps. They are easy to make and you may want to make a few  for friends or to sell at your local craft show. You will need a diamond drill bit to drill the hole in the bottle. Making lighted wine bottle or whiskey bottle lamps is an enjoyable craft  and I am sure you it fun to do.www.lightedwinebottlemaking.com
 
Included with your purchase is some additional tips & information that I wrote that you may find of interest.
 
Making lighted bottles for profit
How to Drill a Hole in a Wine Bottle
How to Drill a Hole in a Glass Block
How To Drill a Hole in a Bottle
 
 
Tips for Inserting Deco Teenty lights in Your Bottle